Pc Card Cover - Toshiba QOSMIO F10 Maintenance Manual

4.17 PC card cover

4.17 PC card cover
Removing the PC card cover
The following describes the procedure for removing the PC card cover (See Figure 4-32).
1. Remove the following screws securing the PC card cover.
?
2. Open the PC card cover toward the outside to unlatch it from hooks and pull up the
PC card cover.
NOTE: Since the PC card cover is deformed when removing it, you cannot reuse it.
M2x3Z BIND
Installing the PC card cover
The following describes the procedure for installing the PC card cover (See Figure 4-32).
1. Install the PC card cover while locking the hooks.
2. Secure the PC card cover with the following screws .
?
4-48
M2? 3Z BIND screw
PC card cover
Figure 4-32 Removing the PC card cover
M2? 3Z BIND screw
4 Replacement Procedures
x2
Hook
x2
QOSMIO F10 Maintenance Manual (960-498)