Table of Contents
Advertisement
Introduction
The MH 1 Profile is a small, powerful profile fixture incorporating a 180 W
long-life LED engine. It provides two gobo wheels, the first with seven rotating
gobos and the second with eight fixed gobos. The fixture has two color
wheels, each with eight colors (including white), smooth electronic dimming,
rotating prism effects, a mechanical focus and iris, as well as strobe effects.
The device is rugged, lightweight and compact, and is ideal for touring
applications or small fixed installations.
The fixture can be controlled using any DMX-compliant controller. It can also
function without DMX control as a standalone device running one of four pre-
programmed shows, with the option of sound-activated scene triggering.
The fixture is supplied with this user manual, a 1.5 m (5 ft.) power cable (local
power plug not included) and two omega brackets for rigging clamp
attachment.
Before using the product for the first time
1. Read 'Safety information' on page 4 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will reset all effects
and functions to their home positions. The fixture head will move. This process
usually takes around 20 seconds.
RUSH MH 1 Profile User Manual
9
Advertisement
Table of Contents
