Introduction; Before Using The Product For The First Time - Martin MAC One User Manual

Introduction

Warning! Before installing, operating or servicing the MAC One lighting fixture,
read the latest version of the fixture's Safety and Installation Manual, paying
particular attention to the Safety Precautions section. The Safety and
Installation Manual is supplied with the fixture and included at the back of this
user manual.
Important! Full specifications for MAC One fixtures and accessories are
available in the MAC One area of the Martin® website at www.martin.com.
Thank you for selecting the MAC One lighting fixture from Martin.
This User Guide is a supplement to the Safety and Installation Manual that is supplied with the fixture and
attached to the back of this User Manual. This combined User Manual plus Safety and Installation Manual
is available for download from the MAC One area of the Martin website at www.martin.com. The User
Manual contains information that is mainly of interest for lighting designers and operators, whereas the
Safety and Installation Manual contains important information for all users, especially installers and
technicians.
We recommend that you check the Martin website regularly for updated documentation. We publish
revised versions each time we can improve the quality of the information we provide and each time we
release new firmware with changes or new features. Each time we revise this guide we list any important
changes on page 2 so that you can keep track of updates.

Before using the product for the first time

1. Check the MAC One area of the Martin website at www.martin.com for the most recent user
documentation and technical information about the fixture. Martin user manual revisions are identified
by the revision letter at the bottom of the inside cover. Read the latest revision of the MAC One Safety
and Installation Manual that is included at the end of the User Manual, paying particular attention to
the 'Safety Precautions' section.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to
operate a damaged fixture.
3. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
4. If fixtures are exposed to a sudden temperature change, give them time to warm or cool to the
ambient temperature before applying power. This will help avoid damage due to condensation.
®
Martin MAC One User Manual Rev. B 5