Introduction; Unpacking; Using For The First Time - Martin MAC 301 User Manual

Introduction

Thank you for selecting the MAC 301 Wash™, an intelligent lighting fixture from Martin Professional™. This
LED-based moving-head washlight features:
• Luxeon Rebel high-power emitters
• DMX control and stand-alone operation with scenes programmed on fixture or captured via DMX
• Onboard control panel and backlit LCD graphic display
• RGB color mixing with CTC
• 'Color wheel' color-snap feature
• Smooth electronic dimming
• Electronic strobe with pulse effects
• Motorized zoom, 13° - 36°
• 430° pan and 300° tilt ranges
• Two 8-bit and two 16-bit DMX control modes
For the latest firmware updates, documentation, and other information about this and all Martin Professional
products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Technical Documentation
Martin Professional A/S
Olof Palmes Allé 18
DK-8200 Aarhus N
Denmark
Warning! Read "Safety Information" on page 3 before installing, powering, operating or servicing
the MAC 301 Wash.

Unpacking

The following items are included with the MAC 301 Wash:
• Two clamp attachment brackets with quarter-turn fasteners.
• This user manual.

Using for the first time

Before applying power to the fixture:
• Check the Martin Professional website at www.martin.com for the most recent user documentation and
technical information about the MAC 301 Wash. Martin user manual revisions are identified by the
revision letter at the bottom of page 2.
• Carefully review "Safety Information" on page 3.
• Check that the fixture's power voltage and frequency ranges match the local AC mains power source.
• If drawing power from a socket, install a suitable power plug on the power cable as described in "Power
cables and power plug" on page 8.
Introduction 7