Introduction; Before Using The Product For The First Time - Martin RUSH MH-2 Wash User Manual

Introduction

The MH-2 Wash is an extremely small, fast and powerful LED moving beam
and wash effect incorporating seven 10 W long-life LEDs. It provides a 20°
beam angle, smooth electronic dimming, as well as strobe effects. The device
is extremely rugged, lightweight and compact, and is ideal for mobile DJ's,
touring or small fixed installations.
The fixture can be controlled using any DMX-compliant controller, or operate
as a standalone device, running one of four pre-programmed shows, with the
option of sound-activated scene triggering.
The fixture is supplied with this user manual and a 1.5 m (5 ft) power cable
(local power plug not included).

Before using the product for the first time

1. Read Safety information on page 5 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture. (See Specifications on
page 32.)
5. Check the Martin Professional website at www.martin.com for the most
recent user documentation and technical information about the fixture.
RUSH by Martin user manual revisions are identified by the revision letter
at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will always reset all
effects and functions to their home positions. The fixture head will move. This
process usually takes around 20 seconds.
RUSH MH-2 Wash user manual 9