Fixture Settings - Martin RUSH MH 1 Profile User Manual

4. Once the level has been selected, press ENTER to set it (or press MENU
to exit without saving any changes).
Music trig sound activation
The fixture has a built-in microphone that can be used to synchronize its
behavior to the beat of music. When the fixture is not connected to a DMX
controller, and is running one of the preprogrammed shows, it can be set to
trigger scene changes (effects, color changes and movement) in synch with
music.
To turn on sound activation:
1. Select SHOW SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select SOUND TRIGGER and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select ON (sound activation on) or OFF
(sound activation off).
4. Press ENTER to set it (or press MENU to exit without saving any
changes).
To adjust the sensitivity of the sound-activation microphone:
1. Select SHOW SETTINGS and press ENTER to confirm.
2. Select SOUND SENSIVITY and press ENTER to confirm.
3. Use the DOWN and UP buttons to change the microphone sensitivity from
0 ...100 (low-high).
4. Once the level has been selected, press ENTER to set it (or press MENU
to exit without saving any changes).

Fixture settings

Pan and/or tilt inversion
The FIXTURE SETTINGS→PAN INVERSE and TILT INVERSE menus can be
used to reverse the direction of pan and/or tilt. These settings are useful for
symmetrical effects with multiple fixtures, or when coordinating the movement
of fixtures that are floor mounted and rigged upside down.
To adjust the pan inversion settings:
1. Select FIXTURE SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select PAN INVERSE or TILT
INVERSE and press ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (inversion) or NO (normal).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).
18 RUSH MH 1 Profile User Manual