Display Settings - Martin RUSH MH 1 Profile User Manual

Pan/tilt feedback
By default, pan/tilt feedback is enabled. This means that if a pan or tilt position
error is detected, the fixture will correct the pan/tilt position.
To deactivate, or activate this function use the FIXTURE SETTINGS→P/T
FEEDBACK menu.
Iris inversion
To invert the iris settings:
1. Select FIXTURE SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select IRIS INVERSE and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (inversion) or NO (normal).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).
Blackout during change or movement
The fixture can be set to black out during gobo changes, color changes and/or
pan and tilt movement. This feature is disabled by default.
To adjust the blackout during show playback settings:
1. Select FIXTURE SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BL. O. P/T MOVING, BL. O.
COLOR CHANGE, or BL. O: GOBO CHANGE and press ENTER to
confirm.
3. Use the DOWN and UP buttons to select YES (blackout during movement
or change) or NO (normal).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).

Display settings

Invert display
Inverting the display is useful if the fixture is hung from a truss or from
elevation. To invert the display:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select DISPLAY INVERSE and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (invert) or NO (normal).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).
RUSH MH 1 Profile User Manual 19