Using The Long/Short Box; Stacking The Fit; Reformer - Peak Pilates fit reformer Owner's Manual

Using the Long/Short Box

Use the long/short box by following the directions below.
To use as a long box:
Place the headrest in the flat position and foot bar and foot bar support bar in the storage position.
1
Place the box lengthwise on the carriage cushion, butting one end against the shoulder pads.
2
To use as a short box:
Place the headrest in the flat position and foot bar and foot bar support bar in the storage position.
1
Place the box on the carriage cushion with one of the long sides resting against the cushioned surface
2
of the shoulder pads.

Stacking the fit

The fit reformer is unique in its design and can be easily stacked without the removal of any parts.
Place the gear bar and gear block in position 3.
1
Make sure at least the center spring remains hooked to the gear bar.
2
Place the foot bar and foot bar support bar in the storage position making sure that the support
3
bar is fully engaged.
WARNING
!
VERIFY THAT THE FOOT BAR SUPPORT BAR IS FULLY ENGAGED IN ITS STORAGE SLOT BEFORE
ATTEMPTING TO LIFT A MACHINE.

reformer

™
OPERATION
www.peakpilates.com 13