OPERATION
Adjusting the Foot Bar
The foot bar has four positions – three functional and one for storage.
To disengage and change the position of the foot bar:
Lift the rod at the end of the foot bar support bar out of its locating slot while holding
1
the foot bar with your other hand.
Re-engage the rod of the support bar to the desired position.
2
WARNING
!
ENSURE THAT THE ROD OF THE FOOT BAR SUPPORT BAR IS FULLY ENGAGED IN BOTH OF ITS
POSITIONING SLOTS (LEFT AND RIGHT SIDES) BEFORE BEGINNING ANY EXERCISE. FAILURE TO
DO SO COULD RESULT IN SERIOUS INJURY.
The fourth position is the storage position. To store the foot bar:
After disengaging the foot bar support bar from a
3
locating slot, lift the foot bar until it's nearly vertical.
Swing the rod of the foot bar support bar toward
the head end of the reformer. Slide the rod into the
storage bracket slot.
WARNING
!
VERIFY THAT THE ROD OF THE FOOT BAR SUPPORT BAR IS FULLY ENGAGED IN THE STORAGE
SLOT BEFORE ATTEMPTING TO LIFT THE REFORMER USING THE HANDLE.
12
fit
reformer owner's manual
™
Three
Functional
Positions
Storage
Position