Table of Contents
Advertisement
ASSEMBLY
Attaching the Reformer Springs
The fit
reformer comes with five reformer springs as
TM
described below:
HEAVY – One heavy spring marked with a red tab.
MEDIUM – Two medium springs marked with yellow tabs.
LIGHT – Two light springs marked with blue tabs.
WARNING
!
AT LEAST ONE SPRING MUST BE ATTACHED TO THE GEAR BAR AT ALL TIMES.
To attach a spring to an eye bolt on the gear bar, lift the end of the spring and insert the spring hook
1
through the respective eye bolt on the gear bar.
Adjusting the Gear Bar
The gear bar has 4 positions: -1, 1, 2, and 3. To adjust the gear bar:
Remove all five springs.
1
Lift the center of the gear bar.
2
Move the gear bar to desired position making sure
3
the bar is fully engaged into the slot.
10
fit
reformer owner's manual
™
Advertisement
Table of Contents
