Computer Setup (f10) Utility—File
NOTE:
Support for specific Computer Setup (f10) Utility options might vary depending on the hardware
configuration.
Option
System Information
About
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Apply Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Description
Lists:
●
Product name
●
Manufacturer
●
SKU number
●
Processor type/speed/stepping
●
Memory Size (Channel A, Channel B) Installed memory size/speed, number of channels (single or
dual) (if applicable)
●
Integrated MAC address for embedded, enabled NIC (if applicable)
●
Chassis serial number
●
Asset tracking number
●
System Board ID
●
System Board CT Number
●
System BIOS (includes family name, version, and date)
●
ME firmware version
Displays copyright notice.
Allows you to set system time and date.
Allows you to update the system ROM with a BIOS image file located on removable media.
Save to Removable Media
Saves system configuration to a formatted USB flash media device.
Restore from Removable Media
Restores system configuration from a USB flash media device.
Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Applies the currently selected default settings and clears any established passwords.
Exits Computer Setup (f10) Utility without applying or saving any changes.
Saves changes to system configuration or default settings and exits Computer Setup (f10) Utility.
Computer Setup (f10) Utility
13