Support for specific Computer Setup options may vary depending on the hardware configuration.
Set Time and Date
Flash System BIOS
Apply Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
System Board CT Number
Cache size (L1/L2)
Chassis serial number
Asset tracking number
Displays copyright notice.
Allows you to set system time and date.
Allows you to flash system BIOS from a USB recovery key.
Allows you to:
Save Current Settings as Default
Restore Factory Settings as Default
Loads the original factory system configuration settings for use by a subsequent "Apply Defaults and Exit"
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration or default settings and exits Computer Setup.
Computer Setup (F10) Utilities