Check And Adjust Belt Tracking - Paramount Fitness 7.55T Owner's Manual

Check and Adjust Belt Tracking

1. Power on the treadmill.
2. Set the treadmill to slow speed. Select Easy Start
and adjust the speed to 4 mi/h (6.5 km/h).
3. Observe the walking belt in motion. Stand directly
behind the treadmill, looking down at the rear roller.
The walking belt should be centered on the rear roller.
If the rear roller is visible one either side of the walking
belt, the belt tracking needs to be adjusted.
4. If necessary, adjust the belt tracking. To shift the
walking belt to the right, loosen the right retention bolt
(8mm) one eighth-turn, and then tighten the left reten-
tion bolt one eighth-turn. To shift the walking belt to the
left, loosen the left retention bolt one eighth-turn, and
then tighten the right retention bolt one eighth-turn.
Adjust the belt tracking until the belt is centered on the
rear roller.
5. Let the treadmill cycle. Increase the speed to 10 mi/h
(16.1 km/h) and let the treadmill cycle for five minutes.
6. Recheck the belt tracking. After the treadmill has
been cycling for five minutes, observe the tracking of
the walking belt. If the walking belt is not tracking cor-
rectly, adjust the tracking.
7. Power down the treadmill.
Paramount 755T/785T Owner's Manual 68