Position And Level The Treadmill; Check And Adjust The Level Of The Treadmill - Paramount Fitness 7.55T Owner's Manual

Position and Level the Treadmill

This section will show you how to adjust the treadmill so that it is level.

Check and Adjust the Level of the Treadmill

Lift the treadmill from the rear. Locate the handle
1.
below the rear roller. Grab the bar with both hands and
lift. It is recommended that two people lift the treadmill
together.
2. Move treadmill into position in the facility. Make
sure that the floor is flat and level, with no bumps or
level changes, where the treadmill is.
3. Power up the treadmill. Plug the treadmill in and turn
on treadmill using the power switch, which is located
near the front right corner of the treadmill. Be certain
that the power cord is routed to the front of the tread-
mill and that it is clear of the liftframe. The treadmill will
automatically adjust to its 'home' position.
4. Check level on the right side. Place a carpenter's
level on the right side rail to determine if the right side
is level.
NOTE: The units are adjusted to be "nominally" level
at the factory and any further adjustments should be
minimal.
5. Locate the right side leg. The top nut on the leg is
the level-locking nut (26mm), the bottom nut is the
level-adjusting nut (22mm).
Paramount 755T/785T Owner's Manual
Level-locking nut
Level-adjusting nut
18