Initial Setup; Warnings - Paramount Fitness 7.55T Owner's Manual

Initial Setup

Warnings

1. Do not attempt any procedure unless you are qualified and
properly equipped to perform the procedure properly and
safely. Otherwise, contact an authorized service technician to
service your treadmill.
2. Make sure that the power cord is clear of the wheel track
for the lift mechanism so that it does not get run over. Also,
make sure that the power cord is not on top of the lift frame
where it could get pinched.
3. The treadmill must be in position to cycle and operate
smoothly and safely. Make sure that there is at least 0.5
meters of clearance on both sides of the treadmill and at least
2 meters of clearance behind the treadmill.
4. The electrical settings for this treadmill are factory set. Ver-
ify that your facilities meet these requirements before con-
necting the treadmill to the electrical outlet. Do not use an
adapter to connect the treadmill to the electrical outlet.
Paramount 755T/785T Owner's Manual 10