Stop And Pause Operation - Paramount Fitness 7.55T Owner's Manual

Stop and Pause Operation

Stop operation is intended for situations that require the treadmill to be stopped
immediately. When activated the stop operation will immediately stop the tread-
mill's walking belt. It is imperative that the user understands the stop operation
before using the treadmill. Please review this section carefully.
There are two ways to activate the stop operation: emergency stop and standard
stop. Both methods will stop the treadmill immediately, but emergency stop is
designed for hazardous situations whereas standard stop is designed for typical
use.
The Pause button allows the user to temporarily pause the operation of the tread-
mill. When activated the pause button will stop and maintain the treadmill in the
program that the user was last in. When pressed again the program will resume
where the user left off. If the pause button is activated and the user fails to press it
again after the number of minutes set in the managers menu for pause mode
duration then the treadmill will clear the program and return to the startup screen.
Paramount 755T/785T Owner's Manual 48