Install The Uprights - Paramount Fitness 7.55T Owner's Manual

Install the Uprights

1. Identify the right upright. Each upright has a notch,
when installed the notches should face each other.
The right upright will have a notch as displayed here.
2. Position the right upright on the right side. As an
assembly convenience, a small tab is provided at the
lower forward end of the upright. Carefully insert this
tab into the slot at the front of the base frame by tilting
the upright forward as you install it. Align the bolt holes
on the upright with the treadmill.
3. Outfit two rear upright bolts. Install a lock washer
then a flat washer onto two of the 8mm x 30mm socket
head cap screws.
4. Install the rear upright bolt. Insert and hand-tighten
the rear upright bolt. Some movement of the upright
will be required for alignment.
Paramount 755T/785T Owner's Manual
Rear Bolt Hole
14