Table of Contents
Advertisement
EDID FUNCTION FOR HDMI MATRIX SWITCHER
EDID Setup
Step 1. Press the EDID button
Step 2. Press SOURCE #1 or #2 button row The button will fl ash blue and the display will show the current Embedded EDID Status.
Step 3. Press the ENTER button
RESET
How to RESET EDID mode
Press
EDID > RECALL > ENTER
Embedded EDID Modes
Embedded EDID setup
Press
EDID > SOURCE > ENTER
SOURCE #1
or
SOURCE #2
Select Embedded EDID :
Mode 1 : FSS
Mode 5 : H36-3D-M
Mode 2 : H24-3D
Mode 6 : 4K2K-3D, PCM-2CH
Mode 3 : H24-3D-M
Mode 7 : DVI-D 1920x1200-60Hz
Mode 4 : H36-3D
Mode 8 : AUTO
EDID function for HDMI Matrix Switcher
Mode 1. FSS (Fast Speed Start)
Mode 2. H24-3D (1080p-24 bits)
Mode 3. H24-3D-M (1080p-24 bits)
Mode 4. H36-3D-M (1080p-36 bits)
EDID FUNCTION
To Change the EDID Setup
The display will show the currently selected EDID mode
To set EDID mode. The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
EDID Return To Factory default
RESET To the FACTORY DEFAULT (1080p-2CH).
Press EDID button : The LCM will show the current EDID status.
Press RECALL button : The LCM will show the RESET EDID.
Press ENTER to confi rm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
Total 8 EDID Modes
To select Embedded EDID mode or LEARNING mode.
Press EDID button: The LCM will show the current EDID status.
Repeatedly depressing the Source 1 button will cycle up thru the options.
Repeatedly depressing the Source 2 button will cycle down thru the options.
Fast Speed Start mode shortens the startup time of the switcher. Selecting this mode
does not force the EDID setup to be cancelled. Users may fi rst select one EDID mode
from mode 2 to 3, and then select mode 1 for fast speed start.
Audio Support: PCM 2CH
Audio Support: MAT(MLP) 7.1CH, PCM-2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS
5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Audio Support: PCM 2CH
17
Advertisement
Table of Contents
