1. Manuals
  2. Brands
  3. Shinybow USA Manuals
  4. Matrix Switcher
  5. SB-5680CAK
  6. Instruction manual

Shinybow USA SB-5680CAK Instruction Manual

8x8 hdmi-hdbaset matrix switcher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
M ULT I MEDI A AU DIO A N D VI SU A L
MODEL : SB-5680CAK
8x8 HDMI-HDBaseT Matrix Switcher
8x8 HDMI-HDBaseT Matrix Switch with Auxiliary Audio I/O
HDMI-HDBaseT-AUDIO MATRIX SWITCHER SERIES
Thank you for purchasing the SB-5680CAK HDMI-HDBaseT Matrix Switcher. You will fi nd this unit easy to install
and highly reliable but it is essential that you read this manual thoroughly before attempting to use 8x8 HDMI-
HDBaseT Matrix switcher.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB-5680CAK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shinybow USA SB-5680CAK

Summary of Contents for Shinybow USA SB-5680CAK

  • Page 1 HDMI-HDBaseT-AUDIO MATRIX SWITCHER SERIES Thank you for purchasing the SB-5680CAK HDMI-HDBaseT Matrix Switcher. You will fi nd this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use 8x8 HDMI-...

  • Page 2: Safety Information

    SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fi re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.

  • Page 3: Table Of Contents

    (8) HDBaseT Inputs. Supports 8 HDMI Outputs, 8 SPDIF Outputs, We assume no responsibility for any inaccuracies that may be and 8 HDBaseT (PoE) Outputs. The SB-5680CAK is based on the contained in this document. We make no commitment to update or HDBaseT standard and supports full resolution HDMI Video with to keep current the information contained in this document.

  • Page 4: Package Contents

    PACKAGE CONTENTS PACKAGE CONTENTS Check that you have the following components; • SB-5680CAK Matrix Switcher • Master wireless IR Remote Control (SW-5680) • 8 each; Individual wireless IR Control (SW-5680-IR01~IR08) • 19 inch Ear mount bracket (Part # 3U-440L) • SB-101 IR Extender distance ~984 feet (300M) Transmitter set.

  • Page 5: Features

    FEATURES FEATURES Based on HDBaseT; bi-directional IR, RS-232, Multi format Audio, Ethernet and PoE. Full resolution HD Video, all HDBaseT signals over one CATx cable. • (8)x HDMI with Auxiliary Audio (Analog Audio) and (8)x HDBaseT Receiver devices matrix switched to •...

  • Page 6: Specifications

    SPECIFICATIONS SPECIFICATIONS • Type of HDMI Switcher: 8x inputs To 8x Outputs HDMI & HDBaseT Matrix Switch with Audio and Extension • HDMI Support: HDMI 4K2K, 1080p-@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats • HDBaseT Support: Bi-directional IR, RS-232, Multi format Audio, Ethernet and PoE. over one CATx cable. •...

  • Page 7: Front Panel

    FRONT PANEL FRONT PANEL 1. POWER ON SWITCH The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving power. The switcher will remember the last setting during a power cycle. When power is removed and resorted, the last confi guration will be evoked. 2.

  • Page 8: Front Panel- Arc

    FRONT PANEL- ARC FRONT PANEL 9. FUNCTION KEY - ARC Audio Return Channel (ARC) is a feature that sends audio from the TV back down the HDMI (or HDBaseT) cable to its source device, in this case, the switcher, The audio additional on the “ Audio/ARC” port. Not all displays support ARC; check your Users Guide for additional information.

  • Page 9: Front Panel- Aux

    FRONT PANEL- AUX FRONT PANEL 10. FUNCTION KEY - AUX The AUX FUNCTION feature allows you to replace the embedded HDMI audio signal with an audio signal that is connected to the switchers Audio AUX Input. Using the AUX function replaces the audio and does not mix the audio. ( Default = AUX Disabled ) To Enable the AUX option on a specifi...

  • Page 10: Front Panel- Hdbaset

    1. Operation will abort if no keys are dressed within 5 seconds. 2. When you select both HDBaseT Input AND HDBaseT Output; the SB-5680CAK will pass the RS-232 and IR signals between the HDBaseT Transmitter (ie; SB-6320T) and the HDBaseT Receiver (ie; SB-6320R). The switcher’s build-in RS-232 ports for that channel...

  • Page 11: Front Panel- Edid

    FRONT PANEL- EDID FRONT PANEL 12. FUNCTION KEY - EDID (1) Used to display change current EDID mode. - Press EDID to select new EDID mode or select - Press SOURCE row #1 or #2 Select EDID modes. - Press ENTER to ready memory location. - Or press EDID again to cancel operation.

  • Page 12: Front Panel - All - Off - Lock - Enter

    FRONT PANEL - ALL - OFF - LOCK - ENTER FRONT PANEL 13. FUNCTION KEY - ALL Disables (mute) video on all destinations OR assign the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show ”0” to indicate none of the destinations are assigned a video source. Option 2 - Press ALL followed by Source 1 thru 8.

  • Page 13: Front Panel - Recall - Memory

    FRONT PANEL - RECALL - MEMORY FRONT PANEL 17. FUNCTION KEY - RECALL The system will show previously stored presets, up to a total of 16. Presets are stored in local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location. - Press RECALL button.

  • Page 14: Rear Panel

    BACK PANEL - SWITCH CONTROLS BACK PANEL 1. DC POWER INLET: Power Socket : The Switcher is fi tted with a AC power plug input connector. Connector Type : IEC 60320 C13 Ensure that the used is of an approved type and is of suffi cient current carrying connector capacity with the correct voltage and connector polarity.

  • Page 15: Back Panel - Hdmi Input / Output

    BACK PANEL - HDMI INPUT / OUTPUT BACK PANEL 5. INPUTS- 1,2,3,4,5,6,7, & 8 HDMI: HDMI Connector: HDMI Type A SMD 19pin Female Connect a HDMI signal source link of HDMI source direct HDMI socket connector. digital video/audio to this Female HDMI connector. This HDMI Note: With the proper adapters, the switcher port support HDMI and DVI digital video sources.

  • Page 16: Back Panel - Hdbaset Controls

    BACK PANEL - HDBaseT CONTROLS BACK PANEL 8. HDBaseT LAN CONNECTION: ALL HDBaseT Tx LAN Port Connector: HDBaseT Phone-Jack 8P8C, RJ-45 Female socket. All Tx LAN : Provides Ethernet (LAN) connection from the LAN Controls: Note: from switcher to HDBaseT switcher to All HDBaseT Transmitter (ie.

  • Page 17: Back Panel - Hdbaset I/O

    BACK PANEL - HDBaseT I/O BACK PANEL 15. INPUT - 1,2,3,4,5,6,7 & 8 HDBaseT (Receiver): To Receive (8) HDMI and control signals via Switcher (8)x HDBaseT Receiver Connector: 8x RJ-45 Jack HDBaseT Receivers to link of Switcher HDBaseT Transmitter. 8P8C Female socket. Switcher used (8)x HDBaseT Receiver Input #1 ~ Input #8 with RJ-45 via CATx (6/6a/7) category extend cable.

  • Page 18: Hdbaset I/O Transmission

    HDBaseT I/O TRANSMISSION HDBASET I/O TRANSMISSION RS-232 Cable Pins Out: PC 232 PINS DB-9P, MALE plug HDBaseT Transmitter SB-6320T: RS-232 PINS OUT DB-9P, FEMALE socket HDBaseT Receiver SB-6320R: RS-232 PINS OUT DB-9P , FEMALE socket...

  • Page 19: Remote Control

    REMOTE CONTROL Before making any connections to the switcher, observe the following: • Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%). • Ensure that the power switch is OFF. • Ensure that all system grounds (earth) are connected to a common point. •...

  • Page 20: Remote Protocol Commands

    REMOTE PROTOCOL COMMANDS IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD) HOW TO SETUP IR CODES : CUSTOM CODE : 41BE POWER ON : 41BE A15E POWER OFF : 41BE A25D ARC : 41BE B847 LOCK : 41BE B54A AUX : 41BE 9966 EDID : 41BE B748...
  • Page 21 REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 41BE IR-01 DATA CODE: IR-02 DATA CODE: SOURCE #1 : 41BE 11EE SOURCE #1 : 41BE 21DE SOURCE #2 : 41BE 12ED SOURCE #2 : 41BE 22DD...
  • Page 22 REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 41BE IR-05 DATA CODE: IR-06 DATA CODE: SOURCE #1 : 41BE 51AE SOURCE #1 : 41BE 619E SOURCE #2 : 41BE 52AD SOURCE #2 : 41BE 629D...

  • Page 23: Edid Functions

    EDID FUNCTION EDID FUNCTION FOR HDMI MATRIX SWITCHER EDID Setup To Change the EDID Setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will fl ash blue and the display will show the current Embedded EDID Status. Step 3.

  • Page 24: Edid Function

    EDID FUNCTION Mode 5 . H36-3D-M (1080p-36 bits) Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH Mode 6 . 4K2K (24/30Hz) HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz) Audio Support: PCM 2CH Mode 7 .
  • Page 25 EDID FUNCTION Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. The button will fl ash blue and the display will show the current Embedded EDID Step 1. Press EDID button Status. Step 2. Press the Destination #8 button row Copy the Destination #8 Display EDID.

  • Page 26: Typical Application

    INSTALLING DIAGRAM Samples connection : 1. Using IR External, RS-232 or Ethernet command to control Switcher SB-5680CAK via PC or SB-100 IR receiver transmit the SB- 5680CAK’s IR signal. 2. Audio output link ARC from TV return channel, HDMI audio source or mixing Auxiliary audio.
  • Page 27 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using SB-5680CAK HDBaseT Transmitter & Receiver with HDBaseT Transmitters (SB-6320T) and HDBaseT Receiver (SB-6320R) to control a projector via RS-232 or IR signals. NOTE: 1. IR Control Projector Over HDBaseT Extender: SB-5680CAK HDBaseT Transmitter & Receiver SB-6320T/SB-6320R HDBaseT Transmitter &...
  • Page 28 Input 01 routed to Destination 01, 03 and 08 SB-6320T Connected to HDBaseT Input 01 a. Destination 01, 03 and 08 will pass bi-directional IR signals to the SB-6320T IR Input & Output and the chassis SB-5680CAK IR Input & Output.
  • Page 29 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using SB-5680CAK with HDBaseT Receiver (SB-6320R) via and IR Transmitters (SB-101) and IR Receiver (SB-100) to control a projector. NOTE: 1. Using IR control Projector Over HDBaseT Extender: HDBaseT Transmitter : SB-5680CAK HDBaseT Tx HDBaseT Receiver : SB-6320R HDBaseT Rx 2.
  • Page 30 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using SB-5680CAK with IR Transmitters (SB-101) via SB-6320R to control a IR signal from Satellite Receiver. NOTE: 1. IR Control Satellite Receiver Over HDBaseT Extender via CATx (6/6a/7) cable: HDBaseT Transmitter : SB-5680CAK HDBaseT Receiver : SB-6320R 2.

  • Page 31: Hdbaset Application

    HDBaseT APPLICATION APPLICATION HDBaseT Matrix Switcher using HDBaseT Transmitters & Receiver (Sold separately). HDBaseT Transmitter with Audio: SB-6320T Distance: Max. 100M INPUTS: 1. 1x HDMI source 2. 1x DVI Audio 3. 1x IR External in OUTPUTS: 1. 1x HDBaseT out Controls: 1x RS-232, 1x IR in, 1x IR out, 2x LAN (Ethernet) 1.
  • Page 32 HDBaseT APPLICATION APPLICATION Optional 19 inch Rack Mount Bracket for SB-6320T and/or SB-6320R: Complete 19 inch 4U rack mount of SB-6069 Install Application : SB-6320T/R SB-6069 (optional) SB-6320T/R 19 INCH 4U-10P RACK MOUNT 1. Model No. : #4U-10p-M130MM SB-6320T/R 4U Ear mount pairs Parts No.: MEER6069ER13000 2.

  • Page 33: Ir Extender

    IR EXTENDER IR RECEIVER: 1. SB-100 IR 300M Receiver Device Cable (3C) IR Receiver (SB-100) R oHS /95/E C INP UT R S -232 IR E XT. in DC 12V IR Rx RS - 232 IR EXT . SB-100 SB-100 IR Receiver Set SB-100 Maximum Distance ~ 984 feet (300 meters) 2.
  • Page 34 IR EXTENDER IR EMITTER: 1. SB-101 IR 300M Transmitter Device Cable (3C) IR Transmitter (SB-101) IR out CAT6/6a/7 DC 12V IR in R oHS /95/E C IR Tx From OUTPUT Receiver Receiver SB-101 SB-101 IR Transmitter Set SB-101 Maximum Distance ~ 984 feet (300 meters) 2.

  • Page 35: Ethernet Serial Interface

    ETHERNET SERIAL INTERFACE ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual. ETHERNET SERIAL INTERFACE Pin Ethernet Reference TXOP TX + TXON TX - RXIP RX +...
  • Page 36 RS-232 SERIAL INTERFACE RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION -2.0 COMPATIBLE For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual. RS-232 SERIAL INTERFACE RS-232 Defi nition -------- Not used Transmitter Receiver -------- Not used...

  • Page 37: Limited Warranty

    LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
  • Page 38 M ULT IM EDI A AUDIO AN D V IS UA L 122 Rose Ln. Suite 303 | Frisco, Texas 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.com...

Table of Contents