Shinybow USA SB-5688CK Instruction Manual
  1. Manuals
  2. Brands
  3. Shinybow USA Manuals
  4. Matrix Switcher
  5. SB-5688CK
  6. Instruction manual

Shinybow USA SB-5688CK Instruction Manual

8x8 hdmi-hdbaset matrix switcher
Hide thumbs Also See for SB-5688CK:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
M ULT I MEDI A AU DIO A N D VI SU A L
MODEL : SB-5688CK
8x8 HDMI-HDBaseT Matrix Switcher
8x8 HDMI Over HDBaseT Matrix Switch with Single CATx
HDMI over HDBaseT Matrix Switcher Series
Thank you for purchasing the SB-5688CK HDMI-HDBaseT Matrix Switcher. You will fi nd this unit easy to install
and highly reliable but it is essential that you read this manual thoroughly before attempting to use 8x8 HDMI-
HDBaseT Matrix switcher.

Advertisement

Table of Contents
loading

Related Manuals for Shinybow USA SB-5688CK

Summary of Contents for Shinybow USA SB-5688CK

  • Page 1 HDMI over HDBaseT Matrix Switcher Series Thank you for purchasing the SB-5688CK HDMI-HDBaseT Matrix Switcher. You will fi nd this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use 8x8 HDMI-...

  • Page 2: Safety Information

    SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fi re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.

  • Page 3: Table Of Contents

    INTRODUCTION The SB-5688CK is professional 8x8 matrix routing switch. Supporting eight (8) HDMI Inputs and (8) HDMI and (8) HDBaseT DISCLAIMERS (PoH optional via the SB-5688CAP*) Outputs.

  • Page 4: Package Contents

    PACKAGE CONTENTS PACKAGE CONTENTS Check that you have the following components; • SB-5688CK Matrix Switcher • RS-232 V2.0 Protocol Instructions • Ethernet V2.0 Protocol Instructions • Master wireless IR Remote Control (SW-HD88CK) • (8) each; Individual wireless IR Control (SW-HD88CK-IR01~IR08) •...

  • Page 5: Features

    FEATURES FEATURES Based on HDBaseT; bi-directional IR, RS-232, Multi Format Audio, Ethernet and PoH (Optional via the SB-5688CAP). Full Resolution HD Video, all HDBaseT signals over single CATx cable. • (8)x HDMI digital video and digital multi-channel audio player source devices matrix switched to (8)x HDMI outputs and (8)x HDBaseT Transmitter with optional PoH (via the SB-5688CAP) output to (8)x destinations.

  • Page 6: Specifications

    SPECIFICATIONS SPECIFICATIONS • Type of HDMI Switcher: 8x inputs To 8x Outputs HDMI over HDBaseT Matrix Switch with Single CATx • HDMI Support: HDMI 4K2K, 1080p-@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats • HDBaseT Support: Bi-directional IR, RS-232, Multi Format Audio, Ethernet and optional PoH (via the SB-5688CAP), over one CATx cable. •...

  • Page 7: Front Panel

    FRONT PANEL FRONT PANEL 1. POWER ON SWITCH The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving power. The switcher will remember the last setting during a power cycle. When power is removed and resorted, the last confi guration will be evoked. 2.

  • Page 8: Front Panel- Edid

    FRONT PANEL- EDID FRONT PANEL 12. FUNCTION KEY - EDID (1) Used to display change current EDID mode. - Press EDID to select new EDID mode or select - Press SOURCE row #1 or #2 Select EDID modes. - Press ENTER to ready memory location. - Or press EDID again to cancel operation.

  • Page 9: Front Panel - All - Off - Lock - Enter

    FRONT PANEL - ALL - OFF - LOCK - ENTER FRONT PANEL 13. FUNCTION KEY - ALL Disables (mute) video on all destinations OR assign the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show ”0” to indicate none of the destinations are assigned a video source. Option 2 - Press ALL followed by Source 1 thru 8.

  • Page 10: Front Panel - Recall - Memory

    FRONT PANEL - RECALL - MEMORY FRONT PANEL 17. FUNCTION KEY - RECALL The system will show previously stored presets, up to a total of 16. Presets are stored in local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location. - Press RECALL button.

  • Page 11: Rear Panel

    BACK PANEL - SWITCH CONTROLS BACK PANEL 1. DC POWER INLET: Power Socket : The Switcher is fi tted with a AC power plug input connector. Connector Type : IEC 60320 C13 Ensure that the used is of an approved type and is of suffi cient current carrying connector capacity with the correct voltage and connector polarity.

  • Page 12: Back Panel - Hdmi Input / Output

    BACK PANEL - HDMI INPUT / OUTPUT BACK PANEL 5. INPUTS- 1,2,3,4,5,6,7, & 8 HDMI: HDMI Connector: HDMI Type A SMD 19pin Female Connect a HDMI signal source link of HDMI source direct HDMI socket connector. digital video/audio to this Female HDMI connector. This HDMI Note: With the proper adapters, the switcher port support HDMI and DVI digital video sources.

  • Page 13: Back Panel - Hdbaset Controls

    BACK PANEL - HDBaseT CONTROLS BACK PANEL 9. HDBaseT RS-232 - 1,2,3,4,5,6,7 & 8 CONNECTION: Remote Port : Terminal Block-3pin Female socket (8)x RS-232 control port to allow for interfacing to a PC. Controls I/O via Switcher HDBaseT Transmitter (8) Rooms each via this Terminal Block-3pin Female socket for serial RS-232 control.

  • Page 14: Back Panel - Hdbaset I/O

    BACK PANEL - HDBaseT I/O BACK PANEL 15. OUTPUT - 1,2,3,4,5,6,7 & 8 HDBaseT (Transmitter): To send (8) HDMI and control signals via Switcher (8)x HDBaseT HDBaseT Transmitter Connector: 8x RJ-45 Jack Transmitters to link (8)x external HDBaseT Receiver. 8P8C Female socket. Switcher used (8)x HDBaseT Transmitter Output #1 ~ Output #8 with optional PoH (via the SB-5688CAP) RJ-45 via CATx(6/6a/7) Link LED :...

  • Page 15: Remote Control

    REMOTE CONTROL Before making any connections to the switcher, observe the following: • Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%). • Ensure that the power switch is OFF. • Ensure that all system grounds (earth) are connected to a common point. •...
  • Page 16 REMOTE PROTOCOL COMMANDS IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD) HOW TO SETUP IR CODES : CUSTOM CODE : 09F6 POWER ON : 09F6 A15E POWER OFF : 09F6 A25D ALL : 09F6 B04F LOCK : 09F6 B54A OFF : 09F6 B14E EDID : 09F6 B748...
  • Page 17 REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 09F6 IR-01 DATA CODE: IR-02 DATA CODE: SOURCE #1 : 09F6 11EE SOURCE #1 : 09F6 21DE SOURCE #2 : 09F6 12ED SOURCE #2 : 09F6 22DD...
  • Page 18 REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 09F6 IR-05 DATA CODE: IR-06 DATA CODE: SOURCE #1 : 09F6 51AE SOURCE #1 : 09F6 619E SOURCE #2 : 09F6 52AD SOURCE #2 : 09F6 629D...

  • Page 19: Edid Functions

    EDID FUNCTION EDID FUNCTION FOR HDMI MATRIX SWITCHER EDID Setup To Change the EDID Setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will fl ash blue and the display will show the current Embedded EDID Status. Step 3.

  • Page 20: Edid Function

    EDID FUNCTION Mode 5 . H36-3D-M (1080p-36 bits) Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH Mode 6 . 4K2K (24/30Hz) HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz) Audio Support: PCM 2CH Mode 7 .
  • Page 21 EDID FUNCTION Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. Step 1. Press EDID button The button will fl ash blue and the display will show the current Embedded EDID Status. Step 2. Press the Destination #8 button row Copy the Destination #8 Display EDID.

  • Page 22: Typical Application

    INSTALLING DIAGRAM Samples connection : 1. Using IR External, RS-232 or Ethernet command to control Switcher SB-5688CK via PC or SB-100 IR receiver transmit the SB- 5688CK’s IR signal. 2. Audio output link ARC from TV return channel, HDMI audio source or mixing Auxiliary audio.
  • Page 23 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using SB-5688CK HDBaseT Transmitter and one HDBaseT Receiver (SB-6320R) to control a projector via RS-232 or IR signals. NOTE: 1. IR Control Projector Over HDBaseT Extender: SB-5688CK HDBaseT Transmitter Application HDBaseT Receiver : - SB-6333R, SB-6333R3...
  • Page 24 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using SB-5688CK with IR Transmitters (SB-101) via SB-6320R to control a IR signal from Satellite Receiver. NOTE: 1. IR Control Satellite Receiver Over HDBaseT Extender via CATx (6/6a/7) cable: Extender via CATx (6/6a/7) cable:...

  • Page 25: Ir Extender

    IR EXTENDER IR RECEIVER: 1. SB-100 IR 300M Receiver Device Cable (3C) IR Receiver (SB-100) R oHS /95/E C INP UT R S -232 IR E XT. in DC 12V IR Rx RS - 232 IR EXT . SB-100 SB-100 IR Receiver Set SB-100 Maximum Distance ~ 984 feet (300 meters) 2.

  • Page 26: Pin Configuration

    IR EXTENDER IR EMITTER: 1. SB-101 IR 300M Transmitter Device Cable (3C) IR Transmitter (SB-101) IR out CAT6/6a/7 DC 12V IR in R oHS /95/E C IR Tx From OUTPUT Receiver Receiver SB-101 SB-101 IR Transmitter Set SB-101 Maximum Distance ~ 984 feet (300 meters) 2.

  • Page 27: Ethernet Serial Interface

    ETHERNET SERIAL INTERFACE ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual. ETHERNET SERIAL INTERFACE Pin Ethernet Reference TXOP TX + TXON TX - RXIP RX +...

  • Page 28: Rs-232 Protocol

    RS-232 SERIAL INTERFACE RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION -2.0 COMPATIBLE For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual. RS-232 SERIAL INTERFACE RS-232 Defi nition -------- Not used Transmitter Receiver -------- Not used...

  • Page 29: Limited Warranty

    LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
  • Page 30 M ULT I MEDI A AU DIO A N D VI SU A L 122 Rose Ln. Suite 303 | Frisco, Texas 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.com...

Table of Contents