Table of Contents
Advertisement
3.3 CD-ROM Drive
To insert a CD-ROM disc, press the eject button of the CD-ROM drive.
The yellow activity light will flash and the front panel will come out a
short distance. Using your fingertips, hold the top and bottom of the
front panel and pull it outward to the very end. (See Fig 3-2.) Align the
center hole of the CD-ROM disc with the center circle of the CD-ROM
holding plate. Press the transparent ring around the center hole of the
CD-ROM until you hear a click. Push the front panel of the CD-ROM
drive back to its original place.
To eject a CD-ROM disc, first ensure that the drive activity light is off.
Then press the eject button on the drive. When the disc pops out of
the drive, remove it and store it properly.
CD-ROM
holding plate
CD-ROM
Figure 3-2: Inserting and ejecting a CD-ROM disc
Chapter 3 Using the Panel PC
2 7
Advertisement
Table of Contents
