Playing Back On A Tv; Remote Control - Panasonic HC-X920 Operating Instructions Manual

Wi-Fi [HC-X920]/[HC-X929]/[HC-X920M]

Playing back on a TV

Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures
on the TV.
A DLNA-compatible TV
≥ Before using, perform the preparations for using the Wi-Fi function.
≥ Please read the operating instructions for the TV about connecting TV to the wireless
access point.
≥ Do not remove the SD card while playing back on a TV.
1
Press Wi-Fi button.
2
[
Touch DLNA Play
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
3
Select this unit (SSID) by the TV side.
≥ Select the media (SD/MEM) and select the motion picture (AVCHD) or still picture (JPEG) to
playback.
4
Perform playback operations with the TV

remote control.

≥ Playback operations may differ depending on the TV in use.
≥ The following operations can be performed if a colour button
is pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit the playback on the TV:
Touch [EXIT] or press Wi-Fi button.
A message is displayed. Touch [YES] to exit.
≥ The images recorded in 3D are played back as 2D.
≥ Scenes recorded in iFrame/MP4 cannot be played back.
≥ Depending on the TV used, it may not playback in AVCHD picture quality even when the scene
recorded in AVCHD is played back.
].
- 147 -

(l 130)

(Examples of operations during
motion picture playback)
A Skip playback
B Stop
C Playback/Pause

