Panasonic HC-X920 Operating Instructions Manual page 137

3
Touch [Set Wireless Access Point].
4
Touch the part with no display of a wireless
access point.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 155.
5
Touch [Manual Connection].
6
Select [Search] or [Set Manually].
[Search]:
[Set Manually]:
∫ When connecting by [Search]
1
Touch [Search].
2
Touch the wireless access point to be connected.
≥ If you touch [Refresh], you can search for wireless access points again.
3
Touch [ENTER].
≥ If an Encryption key (Password) is not set, the connection is complete and a message is
displayed.
4
(When there is an Encryption key (Password))
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page 73.
≥ When the entry is complete, touch [Enter].
5
(When there is an Encryption key (Password))
Touch [NEXT].
≥ A message is displayed when the connection is complete.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
When the preparations for the Wi-Fi function
complete, you can use the following functions:
j [Remote Ctrl] (l
j [DLNA Play] (l
j [Live Cast] (l
j [Hom.Monitor]
Allows you to search for wireless access points, select one, and set it.
Allows you to configure detailed settings by entering the SSID of the
wireless access point you want to connect to.
143)
147)
148)
(l 152)
(l 129) and the Wi-Fi connection are
- 137 -

A [Delete]
B [EXIT]
(l 138)
