White Balance - Panasonic HC-X920 Operating Instructions Manual

White Balance

Automatic White Balance function may not reproduce natural colours depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
≥ Press the CAMERA FUNCTION button to switch to Manual Mode.
≥ For how to perform the settings when using the viewfinder, refer to page 55.
1
Touch [WB].
2
Touch /
≥ Touch [WB] to determine the mode.
Icon
Automatic White Balance adjustment
AWB
Sunny mode: Outdoors under a clear sky
Cloudy mode: Outdoors under cloudy sky
Indoor mode 1: Incandescent light, video lights like in the studio, etc.
Indoor mode 2: Colour fluorescent lamps, sodium lamps in gymnasiums etc.
Manual adjustment mode:
≥ Mercury-vapor lamps, sodium lamps, some fluorescent lights
≥ Lights used for wedding receptions at hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
≥ To return to auto setting, set to
∫ To set the White Balance manually
1 Select , fill the screen with a white subject.
2 Touch and set the blinking
≥ When using the viewfinder, press and hold the
CAMERA FUNCTION button.
≥ When the screen turns black instantly and the
flashing and then lights constantly, the setting is complete.
≥ If the display continues flashing, the White Balance cannot
be set. In this case, use other White Balance Modes.
≥ When the display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
≥ When setting both the White Balance and the iris/gain, set the White Balance first.
is not displayed on the screen when
≥
AWB
to select White Balance Mode.
Mode/Recording conditions
AWB
.
or press the intelligent auto button again.
display stops
is being set.
AWB
- 56 -
(l 55)
MNL
FOCUS
WB
SHTR
IRIS
MNL
FOCUS FOCUS
WB WB
SHTR SHTR
IRIS IRIS