Connecting By Entering An Ssid And Password - Panasonic HC-X920 Operating Instructions Manual

Connecting by entering an SSID and Password

1
Press Wi-Fi button.
2
Touch [Wi-Fi Setup].
3
Touch [Direct Connection].
4
Select the SSID displayed on this unit in the Wi-Fi setting of the smartphone.
5
Enter the Password displayed on this unit into a smartphone.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
When the preparations for the Wi-Fi function
complete, you can use the following functions:
j [Remote Ctrl]
∫ Connecting with
1
Press Wi-Fi button.
2
Touch [Wi-Fi Setup].
3
Touch [Direct Connection].
4
Touch [Change connection type].
5
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
6
Start up the smartphone application "Image App".
7
Scan QR code displayed on this unit with the smartphone.
≥ When using an iOS device, the profile install screen will be displayed on the smartphone. After
installing, close the displayed screen by pressing the Home button and relaunch the "Image App".
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
Once the Wi-Fi function preparations
device's image will be displayed on the smartphone screen and you can use [Remote
Ctrl]. Please refer to page
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
(l 143)
QR code
143 for details about [Remote Ctrl].
(l 129) and the Wi-Fi connection are
(l 129) and the Wi-Fi connection are complete, the
- 140 -