Panasonic HC-X920 Operating Instructions Manual page 187

Problem
Colour or brightness of
the image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Problem
Scenes/still pictures
cannot be played back.
Scenes cannot be deleted.
Problem
Although this unit is
correctly connected to a
TV, images or sounds
cannot be seen.
The images are squeezed
horizontally.
If the SD card is inserted in
another device, it is not
recognised.
Recording
≥ Colour or brightness of the image may change, or you may
see horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent Auto
Mode/Intelligent Auto Plus Mode or set the shutter speed to
1/100 in areas where the power supply frequency is 50 Hz, or
1/125 in areas of 60 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥ Release the protect setting.
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data.
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC, disc etc.
With other products
≥ Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio of
the TV. (l 111)
≥ The audio during playback mode is not output from this unit
when connected to a TV. Sound levels cannot be adjusted
using this unit, so adjust the sound on the TV.
≥ Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operating
instructions of the device for details.
- 187 -
Check points
Check points
(l 106)
Check points
(l 41)