Simple Copy - Panasonic HC-X920 Operating Instructions Manual

∫ Formatting
This is for initialising the USB HDD.
≥ Please be aware that if a media is formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data on a PC etc.
≥ Connect this unit to the USB HDD and touch [Playback HDD]
: [SETUP] # [FORMAT MEDIA] # [HDD]
MENU
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Connect this unit and the USB HDD to format.
You may no longer be able to use the USB HDD if you format them on another device such as a
PC etc.
∫ Displaying media information
The used space of the USB HDD can be checked.
≥ Connect this unit to the USB HDD and touch [Playback HDD]
: [SETUP] # [MEDIA STATUS]
MENU
≥ /
HC-X920 HC-X929 HC-X910
If you touch [CHANGE MEDIA], you can switch the display between the SD card and USB HDD.
HC-X920M
If you touch [CHANGE MEDIA], you can switch the display between the SD card, built-in memory,
and USB HDD.

Simple copy

1
Connect this unit to the USB HDD to prepare for copying.
≥ You cannot supply power to the USB HDD from this unit.
2
Touch [Simple copy].
≥ When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the
USB HDD (l 122), and then perform the operation of Step 1.
3
HC-X920M
Touch the media you want to copy.
4
Touch [YES].
5
Touch [EXIT] when the copy complete message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Touch [CANCEL] while copying.
/
- 120 -
(l 118)