Panasonic HC-X920 Operating Instructions Manual page 144

Using with a wireless access point connection
1
Connect the smartphone and the wireless access point.
2
Press Wi-Fi button and touch [Remote Ctrl].
≥ It will go into connection standby for remote operation.
≥ Even if the Wi-Fi button is pressed continuously for approximately 2 seconds while Wi-Fi is not in
use, it will go into connection standby for remote operation.
(This will operate even when the power of this unit is turned off excluding when the power of this
unit is turned off by pressing the power button)
3
Start up the smartphone application "Image App".
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit remote operations:
Touch [EXIT] or press Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
- 144 -