Playing Back On Your Tv; Audio Dubbing - Panasonic NV-DS27 Operating Instructions Manual

[VIDEO IN]
1
AV IN/OUT
PHONES
S-VIDEO
1
IN/OUT
3
OSD
COUNTER
MULTI/
P-IN-P
V /REW
6
STILL ADV
E
INDEX
K
SELECT
STORE
OFF/ON
P.B.DIGITAL
FOCUS
1, 2
MENU
PHOTO
DATE/
OSD TIME SHOT
COUNTER RESET TITLE
MULTI/
REC A.DUB
P-IN-P
¥
V /REW PLAY FF/
6 1 5
STILL ADV PAUSE STILL ADV
3, 5
E ; D
INDEX STOP INDEX
K L
∫
SELECT
VAR.
SEARCH
STORE
MENU
OFF/ON
P.B.DIGITAL
30

Playing Back on Your TV

By connecting your Movie Camera with your TV, the recorded scenes can be
viewed on your TV screen.
≥Before connecting them, turn off the power of both the Movie Camera and
21-pin Adaptor
TV.
1
[S-VIDEO IN]
[AUDIO IN]
To Make the Indications Appear on the TV Screen
Press the [OSD] Button
2
≥If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor
(purchase separately) is necessary. Consult your dealer.
≥For other notes concerning this item, see page 41.
START/
DATE/ PHOTO
STOP
TIME SHOT
RESET TITLE ZOOM
T
REC A.DUB
¥
PLAY FF/ W
W
1 5
PAUSE STILL ADV
D
;
STOP INDEX
L
∫
VAR. P.B.
SEARCH ZOOM
MENU
SET
ITEM

Audio Dubbing

You can add music or narration to the recorded Cassette.
≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing
function, the original sound is erased. (If you wish to preserve the original
sound, use the [12bit] Mode when recording.)
≥Audio Dubbing cannot be performed on a recording done in LP Mode.
(l 17)
1
2
3
START/
4
STOP
5
ZOOM
T
4
To Cancel Audio Dubbing
W
W Press the [;] Button on the Remote Controller.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [12bit AUDIO] >>
P.B.
[ST2] or [MIX].
ZOOM
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio Dubbing.
SET
MIX: It plays back both the original sound and the sound added by Audio
ITEM
Dubbing simultaneously.
≥For other notes concerning this item, see page 41.
Connect the [AV OUT] Socket of the Movie Camera and the
Video and Audio Input Sockets of the TV.
1
≥Using the AV Cable
, make a connection with the TV. If the TV has an
S-Video Socket, connect the S-Video Cable
3
on the Remote Controller.
~~~~~~~~~~~~~~~~~~~~~~~~
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK]
>> [IN/OUT]. (NV-DS38 only)
Continuing the aforesaid setup, select [A.DUB INPUT] >>
[MIC] or [AV IN]. (NV-DS38 only)
≥Set to [AV IN] when external device is used, and to [MIC] when an
external or built-in microphone is used.
Switch the Movie Camera over to the Still Playback Mode
where you want to add new sound.
Press the [A.DUB] Button on the Remote Controller.
To start Audio Dubbing, press the [;] Button on the Remote
Controller.
2
(not supplied), too.