Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥ Change the mode to
scene.
(l
29)
1
Select the menu.
: [EDIT SCENE] # [SECTION DELETE
MENU
2
Touch the scene with a part to delete.
3
Slide while touching the two top and bottom
section selection buttons
to delete
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback.
(l
4
Touch [ENTER].
5
Touch [YES] and confirm (play back) the edited scene.
≥ When [NO] is touched, a confirmation message appears. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [ENTER].
≥ To continue deleting parts from other scenes, repeat Steps 2-7.
To complete editing
Touch [Return].
≥ Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part of a scene is deleted.
≥
HC-X920M
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform [RELAY SCENE COMBINE].
and touch the play mode select icon. Then, select the AVCHD
and set the section
88)
]
(l
108)
- 103 -
0h00m15s
0h00m15s
0h00m15s