What You Can Operate/Set With A Smartphone During Home Monitoring - Panasonic HC-X920 Operating Instructions Manual

∫ When configuring the home monitor settings using QR code
1
Press Wi-Fi button.
2
Touch [Hom.Monitor].
3
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
4
Start up the smartphone application "Image App".
5
Display the screen of a connection setup to home monitor from the menu of a
smartphone.
6
Scan QR code displayed on this unit with the smartphone.
≥ A confirmation screen is displayed on the screen of a smartphone. Touch [YES] to start home
monitor.
To exit home monitoring:
Touch [EXIT] or press Wi-Fi button.

What you can operate/set with a smartphone during home monitoring

Refer to [Help] in the "Image App" menu for further details on how to operate.
∫ What you can operate with a smartphone
≥ Confirm the condition inside the house
The monitoring image can be confirmed.
≥ The monitoring image can be recorded as a motion picture or a still picture.
≥ It cannot be confirmed with multiple smartphones simultaneously.
≥ Depending upon the environment in which the device is used, motion picture may be like a
frame rate is low.
≥ Voice message
You can talk to each other like portable wireless devices using the smartphone and this unit.
≥ You can talk up to 10 seconds in 20 second interval.
≥ Open the LCD monitor of this unit when using the Voice message function.
∫ What you can set with a smartphone
≥ Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in the home monitoring detection
area.
≥ Detection of some moving and stationary subjects may not be possible due to the condition
of the subject. Check beforehand to see if detection of the moving or stationary object can be
detected.
≥ If the movement of the subject is too fast or too slow, if the subject is too small, or if the
surroundings are too dark, detection of moving and stationary objects may be impossible.
≥ Automatic recording
You can record a motion picture on this unit as it detects a moving or non-moving object.
≥ Automatic recording will record for approximately 30 seconds.
≥ Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the
remaining available recording time.
≥ When automatic recording is performed with moving object detection, automatic recording is
performed only once within the set time.
- 153 -