Panasonic HC-X920 Operating Instructions Manual page 136

5 Touch [NEXT].
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
When the preparations for the Wi-Fi function
complete, you can use the following functions:
j [Remote Ctrl] (l
j [DLNA Play] (l
j [Live Cast] (l
j [Hom.Monitor]
[Manual Connection]
≥ Confirm Encryption key of the selected wireless access point if the network authentication is
encrypted.
≥ When connecting by [Set Manually], confirm the SSID (Identification name), Authentication
method, Encryption type, and Encryption key (Password) of the wireless access point you are
using.
∫ If this is the first time the Wi-Fi button is pressed
1
Press Wi-Fi button.
2
Touch [YES].
3
Touch [Manual Connection].
4
Select [Search] or [Set Manually].
[Search]:
[Set Manually]:
∫ When setting from the Wi-Fi setup menu
1
Press Wi-Fi button.
2
Touch [Wi-Fi Setup].
143)
147)
148)
(l 152)
Allows you to search for wireless access points, select one, and set it.
(l 137)
Allows you to configure detailed settings by entering the SSID of the
wireless access point you want to connect to.
(l 129) and the Wi-Fi connection are
- 136 -
(l 138)