Recording Motion Pictures - Panasonic HC-X920 Operating Instructions Manual

Basic

Recording motion pictures

1
Change the mode to
2
Open the LCD monitor or extend
the viewfinder.
3
Press the recording start/stop
button to start recording.
A Recording button icon
B When you begin recording, ; changes to
¥.
4
Press the recording start/stop button again to pause recording.
≥ Recording can also be started/stopped by touching the recording button icon.
∫ Screen indications in the Motion Picture Recording Mode
Recording mode
Approximate remaining recordable time
R 1h20m ≥ When the remaining time is less than
1 minute, R 0h00m flashes red.
Recording time elapsed
≥ "h" is an abbreviation for hour, "m" for
minute and "s" for second.
0h00m00s
≥ Each time the unit is put into recording
pause, the counter display will be reset to
0h00m00s.
≥ Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen.
≥ It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
.
T
W
 
(l 34)
- 23 -
0h00m00s 0h00m00s 0h00m00s
R 1h20m R 1h20m R 1h20m