About The Screen Indications In The Live Cast Mode - Panasonic HC-X920 Operating Instructions Manual

Touch .
/ / will disappear when no touch function is
≥
performed for a specific period of time. To display them again,
touch the screen.
∫ To start the live broadcast
Touch .
≥ If you press the start recording button, you can simultaneously
record the broadcast to this unit.
/ / will disappear when no touch function is
≥
performed for a specific period of time. To display them again,
touch the screen.
∫ To stop the live broadcast
Touch .
≥ When (grey) is displayed, unsent data is present.
Wait until the unsent data is sent and
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.

∫ About the screen indications in the Live Cast Mode

/ Live Broadcast indication
Line quality
1h23m Elapsed time of the live broadcast
12fps Frame rate
Number of people watching the live
broadcast
≥ Up to 9999 viewers can be
indicated. The indication does not
appear when the number is 0.
E-mail delivery setting
≥ Recording is performed in Intelligent Auto Mode.
≥ If you close the LCD monitor face down while recording, the LCD monitor of this unit will not
display.
≥ Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
≥ Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when
you use this function. Use at your own risk.
is displayed.
(l 150)
(l 150)
- 149 -
R 1h20m R 1h20m R 1h20m
A [EXIT]
R 1h20m R 1h20m R 1h20m
A [EXIT]

