Panasonic HC-X920 Operating Instructions Manual page 188

Problem
VIERA Link does not work.
Cannot copy scenes on
the SD card by connecting
to other equipment with
the USB cable.
Problem
When connected by the
USB cable, this unit is not
detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
Cannot see the PDF
operating instructions for
HD Writer AE 5.0.
About the Wi-Fi function [HC-X920/HC-X929/HC-X920M]
Problem
Cannot connect to
wireless access point or
smartphone.
Cannot operate from
smartphone using
[Remote Ctrl].
With other products
(Setting on this unit)
≥ Connect with a HDMI mini cable (supplied).
, then touch [SETUP] # [VIERA Link] # [ON].
≥ Touch
MENU
(l 113)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the input
using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the connected
device.
≥ Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment.
≥ Connect the supplied USB cable again after restarting the PC
and turning on this unit again.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the screen.
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer AE 5.0.
≥ Read page 141 If the Wi-Fi connection cannot be established.
≥ Install the smartphone app "Image App" on your smartphone.
(l 132)
- 188 -
Check points
Check points
(l 171, 179)
Check points
(l 113)