Shooting Guide - Panasonic HC-X920 Operating Instructions Manual

[SHOOTING GUIDE]

Message is displayed when this unit is moved rapidly.
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
MENU
When "CAMERA PANNING IS TOO FAST." appears, move the unit slowly while recording.
≥ Message will not appear while pausing the recording. (Message will appear even if it is pausing
the recording if [DEMO MODE] is set to [ON].)
[Wind Noise Canceller]
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [Wind Noise Canceller] # desired setting
MENU
[Strong]:
[Normal]:
[OFF]
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/ is displayed.
≥ When [Normal] is set,
≥ This function's default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ If wind sound cannot be reduced with the Wind Noise Canceller function alone, set [BASS
SETTING] to [LOWCUT].
≥ This function cannot be set when using an external microphone.
[LOWCUT]
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
≥ This function can be set only when using an external microphone.
(l 55)
When a strong wind is detected, this option effectively reduces the
wind noise by minimizing the low-pitched sound.
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
Cancel the setting.
will be displayed on the screen.
(l 82)
(l 55)
- 79 -
/ /