Table of Contents
Advertisement
2.
Disconnect the fan cable from the system board (2), and then remove the fan from the computer (3).
3.
If you need to remove the fan insert, remove the three Phillips M2.0 × 4.0 screws (1) that secure the
insert to the computer, and then remove the insert from the computer (2).
Reverse this procedure to install the fan or fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-10
Heat sink description and part number
Description
Heat sink for use with 6 W processors
Heat sink for use with 15 W processors
Before removing the heat sink, follow these steps:
Spare part number
M53875-001
M50401-001
Component replacement procedures
43
Advertisement
Table of Contents
