Heat Sink - HP Envy x360 Maintenance And Service Manual

4. Remove the fan (4) from the computer.
To install the fan, reverse this procedure.

Heat sink

To remove the heat sink, use this procedure and illustration.
Table 5-10 Heat sink description and part number
Description
Heat sink
NOTE: You do not have to remove the heat sink before you remove the system board.
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the heat sink:
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
30).
Spare part number
N86642-001
30).
Heat sink 43