Table of Contents
Advertisement
4.
Remove the charger (4) from the computer.
To install the pen charger, reverse this procedure.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-9
Heat sink description and part number
Description
Heat sink (includes replacement thermal material)
Heat sink thermal pad
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the heat sink:
1.
Remove the two Phillips M2.0 × 3.0 screws (1) and the two Phillips M2.0 × 2.0 broad head screws (2)
that secure the heat sink to the system board.
(Preparation for disassembly on page
Bottom cover on page
28).
Spare part number
N87095-001
M76797-001
28).
Battery on page
29).
Heat sink
39
Advertisement
Table of Contents
