Sph10S Configuration Setting; Assigning Speed Dial - Sena SPH10S User Manual

SPH10S

9. SPH10S CONFIGURATION SETTING

You can set the configuration of the SPH10S by the voice
menu instruction as below.
1. T o enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying "Configuration
menu".
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature by
tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10S will exit the configuration and goes back to
stand-by.
5. I f you want to exit the configuration immediately, rotate
the Jog Dial until you hear a voice prompt saying
"Exit configuration", and tap the Phone Button.
14
The voice prompt for each menu item is as below:
(1) Speed Dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
Speed Dial
Exit configuration
Delete all pairings
Sidetone

9.1 Assigning Speed Dial

Voice Prompt
Factory Default
Execute
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
"Speed dial".
2. Tap the Phone Button, and you will hear a voice
prompt saying "Speed dial one" and "Phone
connected".
(5) Sidetone
(6) Delete all pairings
(7) Exit configuration
VOX phone
VOX intercom
Voice prompt
"Speed dial"
N/A
Tap the Phone Button