Summary of Contents for Sena Bluetooth Mic & Intercom
Page 1
Bluetooth® Mic & Intercom User's Guide www.sena.com...
Page 2
Sena Technologies Inc. reserves the right to make any changes and improvements to its product without prior notice. Sena™ is a trademark of Sena Technologies Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, GoPro®...
CONTENTS 1. INTRODUCTION ..........5 4.6 Enabling/Disabling Voice Prompts ....19 4.7 Enabling/Disabling Sidetone ......20 2. PACKAGE CONTENTS ........7 4.8 Enabling/Disabling Advanced Noise Control ..............20 3. GETTING STARTED ..........9 4.9 Enabling/Disabling Auto Gain Control ... 21 3.1 Installing the Bluetooth Mic & Intercom ...9 4.10 Delete All Bluetooth Pairing Information ..
Page 4
9.1 Pairing with Other Bluetooth Mic & FCC RF Exposure Statement ........ 56 Intercom for Intercom Conversation ....33 FCC Caution ............... 56 9.2 Pairing with Other Sena Headset Models CE Declaration of Conformity ......56 for Intercom Conversation ........35 Industry Canada Statement ........ 57 9.3 Two-way Intercom ..........
1. INTRODUCTION Thank you for choosing the Sena Bluetooth Mic The Bluetooth Mic & Intercom is compliant & Intercom. The Sena Bluetooth Mic & Intercom with the Bluetooth 3.0 supporting the is an ultra-slim, light weight microphone that following profiles: Headset Profile, Hands-Free allows users to make an intercom call.
Page 6
The Bluetooth Mic & Intercom features: Firmware upgradeable Bluetooth microphone for Bluetooth-ready camera Key Specifications: Bluetooth intercom up to 350 meters (380 Bluetooth 3.0 yards)* Four-way conference intercom Supporting profiles: Headset Profile, Advanced Noise Control™ Hands-Free Profile (HFP), Advanced Audio Multipoint Bluetooth for dual mobile Distribution Profile (A2DP), Audio Video phone...
2. PACKAGE CONTENTS Bluetooth Mic & Intercom Status LED Hi-Fi Microphone Charging LED Earbud Jack (+) Button Center Button Micro-USB Charging Port Power Switch (-) Button <Botton> <Front>...
Page 8
Armband Microphone Windscreens Collar Clip USB Power & Data Cable The package does not include stereo headphones. However, it is optional to use stereo headphones with a built-in microphone for the intercom function.
3. GETTING STARTED 3.1 Installing the Bluetooth Mic & Wear the armband on your arm. Intercom Adjust the direction of the microphone 3.1.1 Installing on the Armband to your mouth by rotating the Bluetooth Microphone. Attach the armband on the back of the Bluetooth Mic along the guide rail.
Page 10
3.1.2 Installing on the Collar Clip Attach the Bluetooth Mic on your collar by the clip. Attach the collar clip on the back of the Bluetooth Mic along the guide rail. Adjust the direction of the microphone to your mouth by rotating the Bluetooth Microphone.
3.2 Connecting Your Headphones 3.3 Powering On/Off The Bluetooth Mic does not have internal To power on the Bluetooth Mic, slide the power speakers. By connecting stereo headphones switch to on. The blue and red LEDs will turn that have a built-in microphone into the on.
putting the Bluetooth Mic into pairing mode or 3.6 Using Internal/External entering the “Configuration menu”. It is strongly Microphone recommended for you to use headphones to Users may use either the built-in microphone proplerly set up the system. of the Bluetooth Mic (internal microphone) 3.5 Volume Adjustment or the microphone of a connected pair of headphones (external microphone).
3.7 Function Priority 3.8 Charging The Bluetooth Mic operates in the following The charging LED beside the charging port order of priority: turns red while charging and turns blue when the Bluetooth Mic is fully charged. It takes (highest) Mobile phone, about 2.5 hours to be completely charged.
3.9 Low Battery Warning 3.10.2 Voice Prompt Indicator When you power on the Bluetooth Mic, keep When the battery is low, the blinking blue LED pressing the Center Button and the (+) Button in stand-by mode turns to red and you will hear simultaneously for several seconds until you mid-toned triple beeps and a voice prompt hear high toned triple beeps.
3.11 Fault Reset When the Bluetooth Mic is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the right side of the main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure.
4. CONFIGURATION SETTING You can set the configuration of the Bluetooth The voice prompt for each menu item is as Mic by the voice menu instruction as below. below: 1. To enter into voice configuration menu, press (1) Phone pairing and hold the Center Button for 12 seconds (2) Multipoint pairing until the LED turns solid blue and you hear...
To go into mobile phone pairing mode, tap Multipoint pairing Phone pairing* the (+) Button or the (-) Button until you hear a voice prompt saying “Phone pairing”. Please Phone selective pairing Exit configuration** refer to section 5.1 for details on mobile phone pairing.
4.3 Phone Selective Pairing hear a voice prompt saying “Media selective pairing”. Please refer to section 6.2 for more Voice Prompt “Phone selective pairing” details on media selective pairing. If you tap the (+) or (-) Button, you can exit from the Factory Default media selective pairing mode.
“Speed dial (#)”. 2. You can assign phone numbers for speed dialing by using the Sena Device Manager 4. Call a phone number you want to assign software. For more information, visit the Sena and you will hear a voice prompt saying Bluetooth web site at www.sena.com.
- Voice prompts for factory reset 4.8 Enabling/Disabling Advanced - Voice prompts for speed dial Noise Control 4.7 Enabling/Disabling Sidetone Voice Prompt “Noise control” Enable Factory Default Voice Prompt “Sidetone” Disable Enable / Disable Tap the Center Button Factory Default When Advanced Noise Control is enabled, the Enable / Disable Tap the Center Button...
Bluetooth Mic connects to the Sena Bluetooth pairings”. Tap the Center Button to confirm. Audio Pack or the Sena PRISM. It is useful when you move a lot wearing the Bluetooth Mic from the recording device. It is useful when you move a lot while wearing the Bluetooth Mic and a recording device.
4.11 Reset to Factory Default Set- 4.12 Exit Voice Configuration Menu ting Voice Prompt “Exit configuration” Voice Prompt “Factory reset” Factory Default Factory Default Enable / Disable Tap the Center Button Enable / Disable Tap the Center Button To exit voice configuration menu and get back to stand-by mode, tap the (+) Button or (-) To restore factory default settings on the Button until you hear a voice prompt saying...
Page 23
Press (+) Button or Tap Center Button (-) Button Phone Pairing None Multipoint Pairing None Phone Selective Pairing None Media Selective Pairing None Speed Dial Execute Voice Prompt Enable / disable Sidetone Enable / disable Advanced Noise Control Enable / disable Auto Gain Control Enable / disable Delete All Pairings...
MP3. This pairing operation is 3. Search for Bluetooth device on your mobile only required once for each Bluetooth device. phone. Select the Sena Bluetooth Mic in the The Bluetooth Mic will remain paired with the list of the devices detected on the mobile devices and automatically connects to the phone.
3. If you want to pair a second mobile phone, search for the Bluetooth device on your Typical Bluetooth headsets can connect with mobile phone, and select the Sena Bluetooth only one HFP (Hands-Free Profile) device, Mic in the list of the devices detected on the but multipoint pairing allows the headset to mobile phone.
If you have a stand alone Bluetooth stereo 5.4 Pairing with the Bluetooth Pack device, follow the pairing procedure separately. for GoPro® or PRISM The procedure is the same as the procedure of The Bluetooth Mic can be paired with the “5.1 Mobile Phone Pairing”.
6. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO If you have a MP3 stereo music phone such mobile phone manual. For most smartphones, as a smartphone, sometimes you may need delete the Bluetooth Mic from the list of to selectively use the Bluetooth Mic for Bluetooth devices in setting menu.
4. Enter 0000 for the PIN. Some smart phones may not ask for PIN. 6.2 Media Selective Pairing: A2DP Stereo Music Only 1. To enter into the voice configuration menu, press and hold the Center Button for 12 seconds until you hear a voice prompt saying “Configuration menu”.
7. STEREO MUSIC You can listen to stereo music from your 1. To adjust the volume, tap the (+) Button or the Bluetooth wireless audio device. The Bluetooth (-) Button. audio device must be paired with the 2. To play or pause music, press the Center Bluetooth Mic by following the “Bluetooth Button for 1 second until you hear a mid- Stereo Device Pairing”...
8. MOBILE PHONE CALL MAKING AND ANSWERING 8.1 Mobile Phone Call Making and In stand-by mode, press the Center Button for 3 seconds to activate the Answering voice dialing of your mobile phone. 1. When you have an incoming call, tap the You will hear a high toned single beep.
8.2 Speed Dialing 4. After selecting the last number redial menu, you will hear a voice prompt saying “Last You can quickly make a phone call by using the number redial”. Then, to redial the last phone voice speed dial menu. call number, tap the Center Button.
Page 32
If you have a second mobile phone connected Make sure that you should connect the with the Bluetooth Mic by multipoint connection, mobile phone and the Bluetooth Mic in you can answer the incoming call to the second order to use the speed dial function. mobile phone by tapping the Center Button while you are on the line of the first mobile phone.
9. INTERCOM 9.1 Pairing with Other Bluetooth the LEDs of both Bluetooth Mic turn to blue and intercom connection is automatically Mic & Intercom for Intercom established. The two Bluetooth Mics A and Conversation B are paired with each other for intercom conversation.
Page 34
4. You can make other pairings between the 5. The intercom pairing queue is ‘Last-Come, First- Bluetooth Mic A and C, and between the . If a Bluetooth Mic has multiple paired Served’ Bluetooth Mic A and D by following the same Bluetooth Mics for intercom conversations, procedure as above.
This will end the intercom conversation. the Bluetooth Mic. The SMH5 has a limited capability of having two-way intercom intercom intercom intercom with each other or with other Sena headset friend friend friend models. Start Single tap...
Page 36
9.3.2 Intercom and Mobile Phone Call c. To ignore an incoming phone call, just wait until the caller goes to voice mail. You will 1. When you have an incoming mobile phone maintain the intercom call while the caller is call during an intercom conversation, you will leaving a voice message.
9.4 Three-way Conference Intercom 1. You (A) need to be paired with two other friends (B & C) for three-way conference 9.4.1 Start Three-way Intercom intercom. You (A) can have a three-way conference intercom with two other Bluetooth Mic friends (B & C) by establishing two intercom connections at the same time.
Page 38
4. Now you (A) and two Bluetooth Mic intercom friends (B & C) are having a three-way conference intercom. First Friend Second Friend 3. The second intercom friend (C) may join the intercom by making an intercom call to you First Friend Second Friend (A).
Page 39
1. Press the Center Button for 1 second until Center Button Result you hear a beep to terminate three-way Press for 1” Disconnect (B) & (C) conference intercom completely. It terminates both intercom connections with (B) and (C). Single tap Disconnect (B) 2.
by tapping the Center Button once. To end 9.5 Four-way Conference Intercom the mobile phone call first and maintain the 9.5.1 Start Four-way Intercom intercom conversation, press the Center Button You can have four-way conference intercom for 2 seconds, or wait for the person on the with three other Bluetooth Mic users by adding mobile phone line to end the call.
Page 41
2. Tap or double tap the Center Button to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second Participant friend (C) by double tapping the Center = Intercom Button, you will be disconnected with the Friend of (C) third participant (D) as well.
9.6 Intercom Failure When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low toned double beep signifying an intercom busy signal.
10. UNIVERSAL INTERCOM You can have an intercom conversation 1. Turn on the Bluetooth Mic and a non-Sena with non-Sena Bluetooth headsets using Bluetooth headset which you want to pair the Universal Intercom function. Non-Sena with. Bluetooth headsets can be connected to the 2.
(refer to the users’ manual of the headsets for 1. You (A) need to be paired with non-Sena voice dialing, redialing, and ending a call). Bluetooth headset (B) and another Bluetooth...
Page 45
2. Start an intercom conversation with non-Sena 3. The other Bluetooth Mic (C) may join the Bluetooth headset (B) in your intercom group. intercom by making an intercom call to you For example, you (A) may start an intercom (A).
4. Now you (A), non-Sena Bluetooth headset (B), 10.4 Four-way Universal Intercom and the other Bluetooth Mic (C) are having a You may make a four-way Universal Intercom three-way conference intercom. connection with a couple of different configurations, 1) three Bluetooth Mic and...
Page 47
10.4.1 Four-way Universal Intercom Case 1 2. The other Bluetooth Mic (C) may join the intercom by making an intercom call to you Two Bluetooth Mic (A and C) and two non-Sena (A). Bluetooth headsets (B and D). 1. You (A) may start an intercom conversation...
Page 48
3. The non-Sena Bluetooth headset (D) may 4. Now two Bluetooth Mic (A & C) and two join the conference intercom by making an non-Sena Bluetooth headsets (B & D) are intercom call to the Bluetooth Mic (C). connected with the four-way Universal Intercom.
Page 49
10.4.2 Four-way Universal Intercom Case 2 If the non-Sena headset does not support a multipoint connection then a phone Three Bluetooth Mic (A, C and D) and one non- call connection will be unavailable Sena Bluetooth headset (B). The procedure is while using the Universal Intercom.
To track forward or feature, and enable the EDR setting in track back, press the (+) Button or (-) Butt on the Sena Device Manager. for 1 second until you hear a mid-toned single beep.
12. FIRMWARE UPGRADE The Bluetooth Mic supports firmware upgrade function. Please visit Sena Bluetooth web site at www.sena.com to check the latest software downloads.
13. SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure Intercom Pairing Intercom Pairing Usage PRISM GoPro Pack ® PRISM or Bluetooth Audio Pack: taking pictures, video recording with remote Intercom Pairing audio Intercom Intercom Pairing...
Case 2 Bluetooth Pairing Procedure Intercom Pairing Intercom Pairing Mobile Phone Pairing PRISM GoPro Pack ® Usage Intercom PRISM or Bluetooth Audio Pack: taking Pairing pictures, video recording with remote audio Mobile phone: phone call, listening to music Intercom Intercom Mobile Pairing Phone...
14. OPERATION QUICK REFERENCE Type Description Button Duration Beep Type Description Button Duration Beep Mid-toned Ascending Center Button 5 sec Power-on Power Switch - Solid blue Intercom flashing single beep beeps pairing Center Button of any one of the two Bluetooth Mics Descending Power-off Power Switch -...
This equipment generates, uses and can CERTIFICATION AND SAFETY radiate radio frequency energy and, if not APPROVALS installed and used in accordance with the instructions, may cause harmful interference FCC Compliance Statement to radio communications. However, there is This device complies with part 15 of the FCC no guarantee that interference will not occur rules.
R&TTE Directive (99/5/EC). environment. End users must follow the Hereby, Sena declares that this product is in specific operating instructions for satisfying RF compliance with the essential requirements exposure compliance. The antenna used for this...
RSS standard(s). Operation is owned by the Bluetooth SIG, Inc. and any use subject to the following two conditions: of such marks by Sena is under license. Other (1) This device may not cause interference. trademarks and trade names are those of their (2) This device must accept any interference, respective owners.
WEEE (Waste Electrical and Electronic SAFETY INFORMATION Equipment) Please ensure that the product is properly used The crossed-out wheel bin by observing the warnings and cautions below symbol on the product, to prevent any risk and/or damage to property. literature, or packaging reminds you that all electrical and Product Storage and Management electronic products, batteries,...
(2) When you bring your product from the Do not disassemble, repair or modify the cold place to a warm place product as this may damage the product (3) When you use your product in a hot, and invalidate the product warranty. humid place Do not wrap cables around the product (4) When you use your product after it...
Page 60
Keep product away from pets or small enter the product. Sand may cause severe children. They may damage the product. damage to your product and can be difficult In any place where wireless communication to repair. is prohibited, such as hospitals or Remove the product from your back pocket airplanes, turn off the power and refrain before sitting down.
This product has an irreplaceable rechargeable Any 3rd party USB charger can be used with battery inside. Therefore, when using the Sena products if the charger is approved product, make sure to adhere to the following: by either the FCC, CE, IC or other locally Never separate the battery from the product approved agencies that Sena accepts.
Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
Page 63
In the event any unauthorized person has suit, claim, implementation, redemption or tried to disassemble, repair, or modify the similar action from Sena with regard to any product. occasion such as difficulty, pain, suffering, inconvenience, loss, injury, or death which...
Page 64
2. You must completely understand and representatives, agents, supporting accept all risks (including those occurring firms and suppliers, sole sellers of Sena due to any careless behavior of yours or (collectively referred to as “the company”) others) which may occur during the use of recommend that, before using the this product.
When you use the product, use good damage of transportation means, possessions, judgment; never use it under the or assets which belong to you or third parties influence of alcohol. that may have occurred while you use the product. Further, Sena will not be liable for...
Page 66
PERFORMANCE, FAILURE, OR INTERRUPTION regardless of its use by the initial purchaser of a OF ITS PRODUCTS, EVEN IF SENA OR ITS third party. AUTHORIZED RESELLER HAS BEEN ADVISED Use of this product may violate local or national OF THE POSSIBILITY OF SUCH DAMAGES, AND laws.
Page 67
In addition to damages which may occur due because the user has disassembled, repaired, to the use of the product, Sena will not be or modified it in such way as is not explained liable for damages of the product which occur in the product manual.
Free-of-charge Service explained above, and Sena will not be liable Sena will provide free-of-charge repair or for any claim for damages related with the replacement service for the product when product.
Page 69
1.0.3 www.sena.com User's Guide for Firmware v1.0...
Need help?
Do you have a question about the Bluetooth Mic & Intercom and is the answer not in the manual?
Questions and answers