Configuration Setting - Sena Schuberth SC1 User Manual

14 CONFIGURATION SETTING

You can set the configuration of the SC1 by the voice menu instruction
described below.
1. To enter into voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until the LED shows solid
blue and you hear high toned double beeps. You will also hear a
voice prompt, "Configuration menu".
2. Tap the (+) Button to navigate between the menus. You will
hear voice prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by
tapping the (-) Button.
4. If no button is pressed within 10 seconds, the SC1 will exit the
configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, tap the (+)
Button until you hear a voice prompt, "Exit configuration",
and tap the (-) Button.
The voice prompt for each menu item is as below:
(1) Intercom pairing
(2) Phone pairing
(3) Second mobile phone pairing
(4) Phone selective pairing
(5) Media selective pairing
(6) Speed dial
(7) Audio Boost
(8) VOX phone
(9) VOX intercom
SC1
(10) HD intercom
(11) Voice prompt
(12) RDS AF setting
(13) Noise control
(14) Delete all pairings
(15) Remote control pairing
(16) Universal intercom pairing
(17) Factory reset
(18) Exit configuration
31