Sena SPH10S User Manual page 21

2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items.
3. Tap the Phone Button or the Jog Dial to select a
voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
4. After selecting the last number redial menu, you
will hear a voice prompt saying "Last number
redial". Then, to redial the last phone call number,
tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog
Dial clockwise or counter-clockwise to navigate
between the menus until you hear a voice prompt
saying "Speed dial (#)". Then, tap the Phone
Button or the Jog Dial.
6. If you want to exit the speed dial immediately,
rotate the Jog Dial until you hear a voice prompt
saying "Cancel", and tap the Phone Button or the
Jog Dial. If any button is not pressed within 15
seconds, the SPH10S will exit the voice speed dial
menu and goes back to stand-by mode.
(4) Speed dial 3
(5) Cancel
Note:
Make sure that you should connect the mobile phone and
the headset in order to use the speed dial function.
Tap Phone Button or Tap Jog Dial or Say
Answer
"Hello"
End Tap Phone Button or Press Jog Dial for 2"
Reject Press Jog Dial for 2"
Transfer Press Phone Button for 2"
Call Use phone keypad
Speed Dial Double tap Phone Button
Voice
Tap Phone Button
Command
Mobile Phone Call Button Operations
SPH10S
21