Two-Way Universal Intercom; Three-Way Universal Intercom - Sena SPH10S User Manual

hear a voice prompt saying "Universal intercom
pairing".
3. Perform the operation required for handsfree
pairing on the non-Sena Bluetooth headset (refer to
the users' manual of the headsets you want to use).
The SPH10S will automatically perform pairing with
non-Sena Bluetooth headsets in pairing mode.

16.2 Two-way Universal Intercom

You can initiate the Universal Intercom connection
with non-Sena Bluetooth headsets using the same
intercom connection method as you would between
other Sena headsets. You may single tap the Jog
Dial to begin an intercom conversation with the first
intercom friend, double tap with the second intercom
friend, and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the
Universal Intercom connection, activating the voice
dialing or using the redialing operation. You may also
disconnect the existing connection by ending a call
operation function (refer to the users' manual of the
headsets for voice dialing, redialing, and ending a
call).

16.3 Three-way Universal Intercom

You may make a three-way Universal Intercom
connection with two SPH10Ss and one non-Sena
Bluetooth headset. If the intercom connection is
made, all headsets connected cannot use the mobile
phone call function since the connection between the
headset and the phone is disconnected temporarily.
If you disconnect the intercom call, the mobile phone
connection is made again automatically so that you
can use a mobile phone call function. During the
intercom call, you cannot pick up the incoming phone
call since it is disconnected, however, you can pick it
up if you disconnect the intercom call.
1. You (A) need to be paired with non-Sena Bluetooth
headset (B) and another SPH10S headset (C) for
the three-way conference intercom.
(B)
SPH10S
(A)
(C)
27