Page 2
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd.
7.2 HFP for Phone Call Only MAINTENANCE AND CARE 8. INTERCOM PAIRING DISPOSAL 8.1 Pairing with Other SPH10S Headsets for Intercom Conversation CERTIFICATION AND SAFETY APPROVALS 8.2 Pairing with Other Sena Headset Models for Intercom Conversation • FCC Compliance Statement 9.
• Bluetooth intercom up to 500 meters (540 yards)* Headset & Intercom designed for snow sports helmets. • Four-way conference intercom With the SPH10S, you can call handsfree on your • Three-way conference phone call with intercom Bluetooth mobile phone, listen to stereo music and have...
SPH10S 2. PACKAGE CONTENTS • SPH10S Headset Phone Button Jog Dial • Answer and end a mobile phone call • Answer and end a mobile phone call • Redial last number • Reject an incoming mobile phone call • Call transfer between mobile phone and •...
• Stereo Audio Cable 1. Remove the original ear flaps of your helmet and insert the plastic plate of SPH10S into where the ear flaps are removed in the helmet. 2. Please make sure that one of headset ear flaps with the microphone is located to the left side of your helmet.
SPH10S 4.4 Low Battery Warning 4. POWERING ON/OFF AND CHARGING When the battery is low, the blinking blue LED in stand- by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low Battery”.
LED flashes red and blue alternately and you hear multiple beeps. You will hear a voice prompt saying “Phone pairing”. 2. Search for Bluetooth devices on your mobile phone. Select the Sena SPH10S in the list of the devices...
4. The mobile phone confirms that pairing has completed to recover the Bluetooth connection immediately. and the SPH10S is ready to use. You will hear a voice 2. If Bluetooth connection between the headset and a prompt from the SPH10S saying “Your headset is media player is disconnected, press the Jog Dial for 1 paired”.
“Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. If you have a MP3 stereo music phone such as a Select the Sena SPH10S in the list of devices detected smartphone, sometimes you may need to selectively on your phone.
Intercom Conversation The SPH10S can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SPH10S headsets (A and B) that you Pairing A & B would like to pair with each other.
Served’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom You can set the configuration of the SPH10S by the friend becomes second intercom friend, and third voice menu instruction as below.
SPH10S The voice prompt for each menu item is as below: you can answer the phone by saying “Hello” or any other word loudly. This is enabled from the factory but (1) VOX phone (4) PLC setting you can disable this. If this mode is disabled, you have...
Tap the Jog Dial conversation, it is not terminated by 20 seconds of The PLC (Packet Loss Concealment) algorithm is silence. After turning SPH10S off and on, you can start intercom by voice again. enabled from the factory. It improves the audio quality of the intercom and mobile phone handsfree in the 9.3 Enabling/Disabling Voice Prompts...
Taping the Jog Dial is not available for this setting. 10. FUNCTION PRIORITY 9.6 Exit Voice Configuration Menu Voice Prompt “Exit configuration” The SPH10S operates in the following order of priority: Factory Default (highest) Mobile phone, Enable Tap the Phone Button...
1. To adjust the volume, rotate the Jog Dial. 11.1 By Stereo Audio Cable Plug your stereo MP3 player directly to the SPH10S by using the enclosed 3.5mm stereo audio jack cable. To adjust the volume, rotate the Jog Dial on the headset.
SPH10S 3. To track forward or track back, rotate while pressing 12. MOBILE PHONE CALL the Jog Dial clockwise or counter clockwise. MAKING AND ANSWERING 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call.
SPH10S the mobile phone keypad. 13. TWO-WAY INTERCOM - Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile phone. For this, the voice dialing feature must be available on the 13.1 Start and End Two-way Intercom mobile phone.
SPH10S tapping. A double or triple tapping will do nothing Button. When you hang up the phone call, the in this case. intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep.
(A). You (A) can have a three-way conference intercom with two other SPH10S friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress,...
Page 21
SPH10S 4. Now you (A) and two SPH10S intercom friends (B However, you still have the intercom connection & C) are having a three-way conference intercom. with your second intercom friend (C). Jog Dial Operation Result Press for 1” Disconnect (B) & (C)
You can have four-way conference intercom with three you (A), and your intercom friends (B) and (C). other SPH10S users by adding one more intercom 2. Tap or double tap the Jog Dial to disconnect participant to the three-way intercom. While you are the intercom connection with one of the two having three-way intercom as above in section 14.1, a...
In on the mobile phone line to end the call. this case, the SPH10S automatically tries to reconnect the intercom every 8 seconds and you will hear high Start Tap Jog Dial while having a mobile phone call tone double beeps until the intercom is reestablished.
19. RESET TO FACTORY DEFAULT 20. FAULT RESET SETTINGS When the SPH10S is not working properly or is in a faulty status for any reason, you may reset the system 1. To restore the SPH10S to factory default settings, by pushing the pin-hole reset button on the back of the press and hold the Phone Button for 12 seconds left headset main unit.
4. Insert a paper clip into the reset pin-hole and press the reset button for 1 second with light pressure, at which time the SPH10S will be switched off. Turn the SPH10S back on. By powering back on, this will restore your current settings.
•iPod Touch for stereo music streaming • T wo other SPH10Ss for three-way conference Case 1 intercom • i Phone for mobile phone call and stereo music streaming •SPH10S for two-way intercom Feature Phone Mobile Pairing: 6.1 Call iPhone Intercom...
MAINTENANCE AND CARE BATTERY INFORMATION The SPH10S has an internal, non-removable, The SPH10S should be treated with care and the rechargeable battery. Do not attempt to remove following suggestions will help you protect your the battery from the device as you may damage warranty coverage.
SPH10S DISPOSAL These suggestions apply equally to the headset main unit, speaker-microphone clamp unit, or power The crossed-out wheel bin symbol on charger. the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.
SPH10S CERTIFICATION AND SAFETY APPROVALS • Reorient or relocate the receiving antenna. • Increase the separation between the equipment FCC Compliance Statement and receiver. This device complies with part 15 of the FCC Rules. • Connect the equipment into an outlet on a circuit Operation is subject to the following two conditions: different from that to which the receiver is connected.
Sena is under license. Other trademarks and trade essential requirements and other relevant provisions names are those of their respective owners. of Directive 1999/5/EC. For further information please The SPH10S is compliant with and adopts the consult http://www.senabluetooth.com. Bluetooth Specification 3.0 and has successfully ®...
Device, irrespective of whether and remain alert to the traffic, weather and road the Device is used by the original purchaser or any conditions if you choose to use the SPH10S headset, third party. including all derivative models irrespective of its commercial name or branding (the “Device”), and...
Page 32
4. You fully acknowledge warnings discharge, indemnify and hold harmless Sena from understand that: (a) risks and dangers exist in any and all litigation, claims, debts, demands, using the Device while in traffic, including but not actions and liability which may arise, directly or...
Sena Technologies, Inc. (“Sena”) warrants that this damage in transit, to prepay shipping charges to product (“Product”) shall conform to and perform in Sena, and to use the original shipping container or accordance with published technical specifications equivalent. and the accompanying written materials, and shall...
SPH10S WARNING SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT Sena informs that using this device in public traffic WILL SENA OR ITS DEALERS TOTAL LIABILITY may not be authorized by the law. Please check your EXCEED THE PRICE PAID FOR THE PRODUCT.
Page 35
2.0.0 www.senabluetooth.com User's Guide for Firmware v4.1...