Mobile Phone Call Making And Answering; Speed Dialing - Sena SPH10S User Manual

SPH10S
12. MOBILE PHONE CALL
MAKING AND ANSWERING

12.1 Mobile Phone Call Making and Answering

1. When you have an incoming call, simply tap the
Phone Button or the Jog Dial to answer the call.
2. You can also answer the incoming call by loudly
speaking any word of your choice if Voice Activated
Phone Answering is enabled.
3. To end a call, tap the Phone Button or press the
Jog Dial for 2 seconds until you hear a beep, or
wait for the called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds
until you hear a beep while the phone is ringing.
5. To transfer a call between the mobile phone and
the headset during the phone conversation, press
the Phone Button for 2 seconds until you hear a
beep.
6. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad
and make a call. Then the call is automatically
transferred to the headset.
20
- For some older mobile phones which do not
automatically transfer calls to the headset, press
the Phone Button after entering phone numbers on
the mobile phone keypad.
- Tap the Phone Button in stand-by mode to activate
the voice dialing of your mobile phone. For this,
the voice dialing feature must be available on the
mobile phone. Refer to your mobile phone manual
for further instruction.
Note:
If you are using multipoint mobile phone connection and
you have an incoming call from the second phone during
the call of the first phone, then you may still receive the
call from second phone. In this case, the call from the
first phone is on waiting mode. If you end a call, then it
will automatically guide you to the first phone call.

12.2 Speed Dialing

You can quickly make a phone call by using the voice
speed dial menu.
1. To enter into the voice speed dial menu, double
tap the Phone Button and you will hear a mid-tone
single beep and a voice prompt saying "Speed
dial".