Table of Contents
Advertisement
SPH10
9. SPH10 CONFIGURATION SETTING
You can set the configuration of the SPH10 by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED
shows solid blue and you hear high tone double
beeps. You will also hear a voice prompt saying
"Configuration menu".
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the
command by tapping the Phone Button, or disable
the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10 will exit the configuration and goes back to
stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt
saying "Exit configuration", and tap the Phone
Button.
18
The voice prompt for each menu item is as below:
(1) Speed Dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
Speed Dial
Exit configuration
Delete all pairings
Noise control
9.1 Assigning Speed Dial
Voice Prompt
Factory Default
Execute
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
"Speed dial".
(5) Sidetone
(6) Noise control
(7) Delete all pairings
(8) Exit configuration
VOX phone
VOX intercom
Voice prompt
Sidetone
"Speed dial"
N/A
Tap the Phone Button
Advertisement
Table of Contents
