Enabling/Disabling Voice Prompts; Enabling/Disabling Sidetone - Sena SPH10S User Manual

SPH10S
by speaking any word loudly enough. The most
effortless way to trigger intercom VOX is to blow into
the microphone as if blowing dust off the microphone.
If you start an intercom conversation by VOX, the
intercom terminates automatically when you and your
intercom friend remain silent for 20 seconds. However,
if you manually start an intercom conversation by
tapping the Jog Dial, you have to terminate the intercom
conversation manually.
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise.
If you tap the Jog Dial to start an intercom conversation,
it is not terminated by 20 seconds of silence. After
turning SPH10S off and on, you can start intercom by
voice again.
16

9.4 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable
Disable
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset

9.5 Enabling/Disabling Sidetone

Voice Prompt
Factory Default
Enable
Disable
Sidetone is the sound of your own voice as picked up
by your headset's microphone and reproduced in your
own ear, by your own speaker. It helps you to naturally
speak at the correct level according to varying helmet
noise conditions. If this feature is enabled, you can hear
what you are speaking during an intercom conversation
or a phone call.
"Voice prompt"
Enable
Tap the Phone Button
Tap the Jog Dial
"Sidetone"
Disable
Tap the Phone Button
Tap the Jog Dial