Battery Temperature Sensor; Figure 4, Left Side Features; Figure 5, Battery Temperature Sensor (Bts) - Magnum Energy MM AE Series Owner's Manual

1.0 Introduction
15
16
17

Figure 4, Left Side Features

15. AC Output Connection - AC knockout (output) for
hardwiring.
16. AC Input Connection - AC knockout (input) for hardwiring.
17. DC Ground Terminal - this connection is used to tie the
exposed chassis of the inverter to the DC grounding system. This
terminal accepts CU/AL conductors from #14 AWG to #6 AWG.

Battery Temperature Sensor

A plug-in external Battery Temperature Sensor (BTS) is provided
for units with the battery charger feature. When installed, the
BTS automatically adjusts the battery charger's BULK, ABSORB,
and FLOAT voltage set-points (based on temperature) for better
charging performance and longer battery life. If the temperature
sensor is NOT installed and the batteries are subjected to large
temperature changes, battery life may be shortened.
~ 1"
~2 "
F R O N T V IE W
~¾ "
0 .3 7 5" d ia m e te r
Ca b le
S ID E V IE W
~½ "

Figure 5, Battery Temperature Sensor (BTS)

© 2010 Magnum Energy, Inc. 5