Input Commands Format - KERN CPB 3K0.1 Operating Manual

Scale will do the following depending on the Accumulation and Print
settings:
PRINT
AC Auto
FUNCTIONS
Accumulate and print
automatically
Print Auto
Automatically
Accumulate but not
print,
Print mAn
Print
[Print] key pressed
Print
and
automatically
stable
Cont to PC
[Print]
function

10.5 Input commands format

The scale can be controlled with the following commands. The commands must be
sent in upper case letters, i.e. "T" not "t". Press the Enter key of the PC after each
command.
T<cr><lf>
Z<cr><If>
P<cr><lf>
R<cr><lf>
C<cr><lf>
CPB-BA-defsi-0712
ACCUMULATION FUNCTIONS
only when
continuously
accumulate
when
key no
Tares the scale to display the net weight. This is the same as
pressing [Tare] key
Sets the zero point for all subsequent weighing. The display
shows zero.
Prints the results to a PC or printer using the optional RS-232
interface. It also adds the value to the accumulation memory if
the accumulation function is not set to automatic. In CBC-E,
the [Print] key will either print the current items being counted
or the results of the accumulation memory if [M+] is pressed
first.
Recall and Print- Same as if first the [MR] key and then the
[Print] key is pressed. Will display the current accumulated
memory and print the total results.
Same as pressing [MR] first and then the [C] key to erase the
current memory.
AC mAn
Print automatically
Accumulate and print
when [M+]
pressed
Accumulate and print
when [M+] or [Print]
is pressed
Print continuously
and accumulate
when [M+]
pressed
[Print] key
function
AC Off
Print automatically,
[M+] key has no
function
is
Print when [Print]
key is pressed,
[M+] key has no
function
Print continuously
is [M+] and [Print] key
have no function
no
65